datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
ADI
Analog Devices
Description : Color="FF003B">12-Bit Color="FF003B">Deep Color with Quad HDMI Receiver

GENERAL DESCRIPTION
The ADV7614 is a high quality, single-chip integrated 4:1 multiplexed High-Definition Multimedia Interface (HDMI™) Receiver.
The ADV7614 incorporates a Quad input HDMI 1.3-compatible Receiver that supports all HDTV formats up to 1080p and displays resolutions up to UXGA (1600 × 1200 at 60 Hz). The reception of encrypted video is possible with the inclusion of HDCP. The HDMI Receiver also includes programmable/adaptive equalization that ensures robust operation of the interface with cable lengths up to 30 meters.

FEATURES
   Ultralow jitter digital PLL
   Quad HDMI Rx
      4:1 multiplexed HDMI Receiver
      HDMI 1.3, DVI 1.0
      225 MHz HDMI Receiver
      HDMI repeater support
      High-bandwidth digital content protection (HDCP 1.3)
      36-/30-/24-bit Color="FF003B">Deep Color support
      HDMI 1.3-compatible audio interface
      Programmable/adaptive equalizer for cable lengths up to
         30 meters
      Internal EDID RAM
      EDID with HDMI cable power support
      CEC support
   Audio support
      S/PDIF (IEC90658-compatible) digital audio output
      Super audio CD (SACD) with DSD output interface
      Compressed SACD with DST output interface
      High bit rate (HBR) audio
         Dolby TrueHD
         DTS-HD master audio
         DTS-HD high resolution audio
      On-board audio mute controller
   General
      Highly flexible output interface
      12-/10-/8-bit 4:4:4 or 12-/10-/8-bit 4:2:2 pixel output interface
      STDI function support standard identification
      Any-to-any 3 × 3 Color space conversion matrixes
      Free-run time generator
      2 programmable interrupt request output pins
      Color controls
   Low standby power

APPLICATIONS
   Advanced TVs
      AVR video Receivers
      PDP HDTVs
      LCD TVs (HDTV ready)
      OLED HDTVs
   LCD/DLP front projectors
   HDMI switchers

Description : Color="FF003B">12-Bit, 170 MHz, Video and Graphics Digitizer with Quad HDMI Receiver

GENERAL DESCRIPTION
The ADV7604 is a high quality, single chip, multiformat video decoder, graphics digitizer with an integrated 4:1 multiplexed High-Definition Multimedia Interface (HDMI®) Receiver. The ADV7604 contains one main component processor (CP) that processes YPrPb and RGB component formats, including RGB graphics. The CP also processes the video signals from the HDMI Receiver. The ADV7604 can operate in Quad HDMI and analog input mode, thus providing simultaneous HDMI and analog video sync processing. This allows for fast switching between HDMI and the ADCs.

 

Part Name(s) : SII9136CTU-3
ETC
Unspecified
Description : 300MHz HDMI Color="FF003B">Deep Colour Transmitter

The SiI9136-3 transmitter is an HDMI® Color="FF003B">Deep Colour transmitter with 3D and 4K x 2K support for consumer electronics products such as set-top boxes, Blu-ray players and recorders, A/V Receivers, DVD players and recorders, personal video recorders, home theater-in-a-box systems, and home theater PCs.

The SiI9136-3 transmitter, with the latest generation 300 MHz TMDS™ core, enables home theatre devices to deliver up to 16-bit Color="FF003B">Deep Colour at 1080p/30 resolutions and up to Color="FF003B">12-Bit Color="FF003B">Deep Colour at 1080p/60 resolutions. On the audio side, High-Bitrate (HBR) audio formats (such as Dolby® TrueHD and DTS-HD) are supported for an enhanced digital audio experience.

Video Input

Audio Input

HDMI Output

 

Part Name(s) : SII1292 SII1292CNUC
SILICONIMAGE
Silicon image
Description : MHL Bridge and HDMI Monitor Receiver

General Description
The SiI1292 MHL Bridge and HDMI Monitor Receiver facilitates the design of low-pin count, low-power mobile-to-standard HDMI®-interoperable applications.
The Silicon Image Mobile High-definition Link (MHL™) technology carries formatted video and audio from compatible transmitters, using only 3 signal lines, power, and ground (5 pins total) compared to the 19 pins required for the standard High Definition Multimedia Interface (HDMI).
As an MHL bridge, the SiI1292 device supports a single MHL input to provide MHL capability in computer or multimedia display devices.

Features
● The MHL input function of the bridge receives
   data over a single differential pair instead of four pairs
● A single-wire control bus supports all sideband
   signaling for DDC, Remote Control, and Hot Plug
   Detect (HPD)
● The bridge converts data received in the MHL
   format to standard HDMI, and supports all
   resolutions ranging from 25 MHz to 75 MHz
HDMI Receiver mode supports all resolutions
   between 25–225 MHz including 1080p60 Color="FF003B">12-Bit Color="FF003B">Deep Color

The combined transmitter and bridge implements a total A/V interface solution with the following features:
● I2C interface for configuration by local microcontroller
● Built-in adaptive equalizer for long cable support on HDMI
HDMI and DVI 1.0 transmitter compatibility
● Low power 1.2 V core
● 40-pin QFN, 6 mm x 6 mm body size
● Extended commercial temperature range
   (–20 C to +85 °C).

Part Name(s) : TDA19978AHV TDA19978A
NXP
NXP Semiconductors.
Description : Quad HDMI 1.3a Receiver interface with equalizer (HDTV up to 1080p, up to UXGA for PC formats)

General description
The TDA19978A is a four input HDMI 1.3a compliant Receiver with embedded EDID memory. The built in auto-adaptive equalizer improves signal quality and allows the use of cable lengths up to 25 m (laboratory tested with a 0.5 mm (24 AWG) cable at 2.05 gigasamples per second). The HDCP key set is stored in non-volatile One Time Programmable (OTP) memory for maximum security. In addition, the TDA19978A is delivered with software drivers to ease configuration and use.

Features and benefits
■ Complies with the HDMI 1.3a, DVI 1.0, CEA-861-D and HDCP 1.2 standards
■ Four (Quad) independent HDMI inputs, up to the HDMI frequency of 205 MHz
■ Embedded auto-adaptive equalizer on all HDMI links
■ EDID memory: 253 shared bytes and three bytes dedicated to each HDMI input
■ Supports Color depth processing (8-bit, 10-bit or Color="FF003B">12-Bit per Color)
Color gamut metadata packet with interrupt on each update, readable via the I2C-bus
■ Up to four S/PDIF or I2S-bus outputs (eight channels) at a sampling rate up to 192 kHz with IEC 60958/IEC 61937 stream
■ HBR audio stream up to 768 kHz with four demultiplexed S/PDIF or I2S-bus outputs
■ HBR streams (e.g. DTS-HD master audio and Dolby TrueHD up to eight channels due to HBR packet for stream with a frame rate up to 768 kHz) support
■ DSD and DST audio stream up to six DSD channels output for SACD with DST Audio Packet support
■ Channel status decoder supports multi-channel reception
■ Improved audio clock generation using an external reference clock
■ System/master clock output (128/256/512 × fs) enables the use of the UDA1334BTS
■ The HDMI interface supports:
   ◆ All HDTV formats up to 1920 × 1080p at 50/60 Hz and WUXGA (1920 × 1200p at 60 Hz) with support for reduced blanking
   ◆ PC formats up to UXGA (1600 × 1200p at 60 Hz)
■ Embedded oscillator (an external crystal can be used)
■ Frame and field detection for interlaced video signal
■ Sync timing measurements for format recognition
■ Improved system for measurements of blanking and video active area allowing an accurate recognition of PC and TV formats
■ HDCP with repeater capability
■ Embedded non-volatile memory storage of HDCP keys
■ Programmable Color space input signal conversion from RGB-to-YCbCr or YCbCr-to-RGB
■ Output formats: RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 semi-planar based on the ITU-R BT.601 standard and YCbCr 4:2:2 ITU-R BT.656
■ 8-bit, 10-bit or Color="FF003B">12-Bit output formats selectable using the I2C-bus (8-bit and 10-bit only in 4:4:4 format)
■ I2C-bus adjustable timing of video port (tsu(Q) and th(Q))
■ Downsampling-by-two with selectable filters on Cb and Cr channels in 4:2:2 mode
■ Internal video and audio pattern generator
■ Controllable using the I2C-bus; 5 V tolerant and bit rate up to 400 kbit/s
■ DDC-bus inputs 5 V tolerant and bit rate up to 400 kbit/s
■ LV-TTL outputs
■ Power-down mode
■ CMOS process
■ 1.8 V and 3.3 V power supplies
■ Lead-free (Pb) HLQFP144 package

Applications
■ HDTV
■ High-End TV
■ YCbCr or RGB high-speed video digitizer
■ Home theater amplifier
■ Projector, plasma and LCD TV
■ DVD recorder
■ Rear projection TV
■ AVR and HDMI splitter

Description : Dual Port, Xpressview,3 GHz HDMI Receiver

GENERAL DESCRIPTION
The ADV7619 is a high quality, two input, one output (2:1) multiplexed High-Definition Multimedia Interface (HDMI®) Receiver. The ADV7619 is offered in professional (no HDCP keys) and commercial versions. The operating temperature range is 0°C to 70°C.
The ADV7619 incorporates a dual input HDMI-capable Receiver that supports all mandatory 3D TV formats defined in the HDMI 1.4a specification, HDTV formats up to 1080p 36-bit Color="FF003B">Deep Color/2160p 8-bit, and display resolutions up to 4k× 2k (3840 × 2160 at 30 Hz). It integrates an HDMI CEC controller that supports the capability discovery and control (CDC) feature.
The ADV7619 incorporates Xpressview™ fast switching on both input HDMI ports. Using the Analog Devices, Inc., hardware based HDCP engine to minimize software overhead, Xpressview
technology allows fast switching between both HDMI input ports in less than 1 sec.

FEATURES
High-Definition Multimedia Interface (HDMI®) 1.4a features supported
 All mandatory and additional 3D video formats supported Extended Colorimetry, including sYCC601, Adobe® RGB, Adobe YCC601, xvYCC extended gamut Color CEC 1.4-compatible
HDMI 3 GHz Receiver
 297 MHz maximum TMDS clock frequency
 Supports 4k × 2k resolution
 Xpressview fast switching of HDMI ports
 Up to 48-bit Color="FF003B">Deep Color with 36-/30-/24-bit support
 High-bandwidth Digital Content Protection (HDCP) 1.4 support with internal HDCP keys
 HDCP repeater support: up to 127 KSVs supported
 Integrated CEC controller
 Programmable HDMI equalizer
 5 V detect and Hot Plug assert for each HDMI port
Audio support
 Audio support including high bit rate (HBR) and Direct Stream Digital (DSD)
 S/PDIF (IEC 60958-compatible) digital audio support
 Supports up to four I2S outputs
Advanced audio mute feature
Dedicated, flexible audio output port
Super Audio CD® (SACD) with DSD output interface
HBR audio
 Dolby® TrueHD
 DTS-HD Master Audio™
General
 Interrupt controller with 2 interrupt outputs
 Standard identification (STDI) circuit
 Highly flexible, 48-bit pixel output interface
 36-bit output for resolutions up to 1080p Color="FF003B">Deep Color
 2 × 24-bit pass-through outputs for HDMI formats greater than 2.25 GHz
 Internal EDID RAM
 Any-to-any, 3 × 3 Color space conversion (CSC) matrix
 128-lead TQFP_EP,14 mm × 14 mm package

APPLICATIONS
Projectors
Video conferencing
HDTV
AVR, HTiB
Soundbar
Video switch

Part Name(s) : EP9132
ETC
Unspecified
Description : HDMI 1.3 Splitter

Overview
The EP9132 is an DVI/HDMI splitter with integrated HDCP decryption/encryption engines and is compliant with HDMI Rev 1.3b and HDCP Rev 1.2 specifications. The EP9132 receives DVI/HDMI inputs, process HDCP decryption and encryption and transmits the data to 2 DVI/HDMI ports. The chip uses an external EE to store the encrypted HDCP Receiver/transmitter keys.

Features
• DVI Specification 1.0 Compliant
HDMI Specification 1.3b Compliant
• Integrated HDCP decryption/encryption engines which are compliant with HDCP Rev 1.2
   specification
• Encrypted HDCP keys store in external serial EE
• Wide Frequency Range: 25MHz - 225MHz
• Support Color="FF003B">12-Bit Color="FF003B">Deep Color up to 1080p
• Supports 1 DVI/HDMI input port and 2 DVI/HDMI output ports
• Supports conversion of HDMI signaling to DVI signaling
• Supports HDCP Repeater
• Re-Sample architecture to filter input noise and recover the input data
• Re-Drive architecture to regenerate clean TMDS signal
• Cascadable to make more than 2 output ports
• Single 3.3V CMOS Design
• 80-Pin LQFP (Pb-Free)

Description : Dual Port, Xpressview, 225 MHz HDMI Receiver

GENERAL DESCRIPTION
The ADV7612 is offered in automotive, professional (no HDCP), and industrial versions. The operating temperature range is −40°C to +85°C.

FEATURES
    High-Definition Multimedia Interface (HDMI®) 1.4a features supported
        All mandatory and additional 3D video formats supported
        Extended Colorimetry, including sYCC601, Adobe RGB,
        Adobe YCC 601, xvYCC extended gamut Color
        CEC 1.4-compatible
    HDMI Receiver
        225 MHz maximum TMDS clock frequency
        Xpressview fast switching of HDMI ports
        36-/30-bit Color="FF003B">Deep Color and 24-bit Color support
        High-bandwidth Digital Content Protection (HDCP) 1.4 support with internal HDCP keys
        HDCP repeater support Up to 127 KSVs supported
        Integrated CEC controller
        Programmable HDMI equalizer
        5 V detect and Hot Plug assert for each HDMI port
    Audio support
        Audio support including high bit rate (HBR) and direct stream digital (DSD)
        S/PDIF (IEC 60958-compatible) digital audio support
        Supports up to four I2S outputs
        Advanced audio mute feature
        Dedicated, flexible audio output port
        Super audio CD (SACD) with DSD output interface
        HBR audio
            Dolby® TrueHD
            DTS-HD Master Audio™
    General
        Interrupt controller with two interrupt outputs
        Standard Identification (STDI) circuit
        Highly flexible 36-bit pixel output interface
        Internal EDID RAM
        Any-to-any 3 × 3 Color space conversion (CSC) matrix
        2-layer PCB design supported
        100-lead LQFP_EP, 14 mm × 14 mm package
        Qualified for Automotive Applications

APPLICATIONS
    Projectors
    Automotive
    Video conferencing
    HDTVs
    AVR, HTiB
    Soundbars
    Video switches

Description : Low Power, 165 MHz HDMI Receiver

Color:rgb(0, 0, 0); font-family:tradegothicltstd-bdcn20; font-size:17pt">GENERAL DESCRIPTION
Color:rgb(0, 0, 0); font-family:minionpro-regular; font-size:10pt">The Color:rgb(0, 0, 255); font-family:minionpro-regular; font-size:10pt">ADV7610 Color:rgb(0, 0, 0); font-family:minionpro-regular; font-size:10pt">is offered in professional (no HDCP) and industrial Color:rgb(0, 0, 0); font-family:minionpro-regular; font-size:10pt">versions. The operating temperature range is −40°C to +85°C. Color:rgb(0, 0, 0); font-family:minionpro-regular; font-size:10pt">The Color:rgb(0, 0, 255); font-family:minionpro-regular; font-size:10pt">ADV7610 Color:rgb(0, 0, 0); font-family:minionpro-regular; font-size:10pt">is a high quality, single input HDMI-capable Color:rgb(0, 0, 0); font-family:minionpro-regular; font-size:10pt">Receiver. It incorporates an HDMI-capable Receiver that supports Color:rgb(0, 0, 0); font-family:minionpro-regular; font-size:10pt">all mandatory 3D TV defined in HDMI specification. The Color:rgb(0, 0, 255); font-family:minionpro-regular; font-size:10pt">ADV7610 Color:rgb(0, 0, 0); font-family:minionpro-regular; font-size:10pt">supports formats up to UXGA 60 Hz at eight bits. Color:rgb(0, 0, 0); font-family:minionpro-regular; font-size:10pt">It integrates a CEC controller that supports the capability
Color:rgb(0, 0, 0); font-family:minionpro-regular; font-size:10pt">discovery and control (CDC) feature.

Color:rgb(0, 0, 0); font-family:minionpro-regular; font-size:10pt">The following audio formats are accessible:
Color:rgb(0, 0, 0); font-family:symbolmt; font-size:10pt">• Color:rgb(0, 0, 0); font-family:minionpro-regular; font-size:10pt">Four streams from the IColor:rgb(0, 0, 0); font-family:minionpro-regular; font-size:6pt">2Color:rgb(0, 0, 0); font-family:minionpro-regular; font-size:10pt">S serializer (eight channels)
Color:rgb(0, 0, 0); font-family:symbolmt; font-size:10pt">• Color:rgb(0, 0, 0); font-family:minionpro-regular; font-size:10pt">A stream from the S/PDIF serializer (two uncompressed Color:rgb(0, 0, 0); font-family:minionpro-regular; font-size:10pt">channels or N compressed channels, for example, AC3)
Color:rgb(0, 0, 0); font-family:symbolmt; font-size:10pt">• Color:rgb(0, 0, 0); font-family:minionpro-regular; font-size:10pt">A DST stream

CALMIRCO
California Micro Devices Corp
Description : HDMI Receiver Port Protection and Interface Device

Product Description
The CM2021 HDMI Receiver Port Protection and Interface Device is specifically designed for next generation HDMI Host interface protection.

Features
• 0.05pF matching capacitance between the TMDS intra-pair
• Level shifting circuitry, including ±8kV ESD protection on all TMDS lines
• Matched 0.5mm trace spacing (TSSOP)
• Simplified layout for HDMI connectors
• Backdrive protection

Applications
• PC
• Consumer Electronics
• Set Top Box
• Displays and Digital Television

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]