P/N + Description + Content Search

GENERAL DESCRIPTION
The ADV7403 is a high quality, single chip, Multiformat Video Decoder and Graphics Digitizer. This Multiformat Decoder supports the conversion of PAL, NTSC, and SECAM standards in the form of composite or S-Video into a digital ITU-R BT.656 format.

FEATURES
   Four Noise Shaped Video® 12-bit ADCs sampling up to
      140 MHz (140 MHz speed grade only)
   12 analog input channel mux
   SCART fast blank support
   Internal antialias filters
   NTSC/PAL/SECAM color standards support
   525p-/625p-component progressive scan support
   720p-/1080i-component HDTV support
   Digitizes RGB Graphics up to 1280 × 1024 @ 75 Hz (SXGA)
      (140 MHz speed grade only)
   24-bit digital input port supports data from DVI/HDMI Rx IC
   Any-to-any, 3 × 3 color-space conversion matrix
   Industrial temperature range (−40°C to +85°C)
   12-bit 4:4:4/10-/8-bit 4:2:2 DDR pixel output interface
   Programmable interrupt request output pin
   VBI data slicer (including teletext)

APPLICATIONS
   LCD/DLP™ rear projection HDTVs
   PDP HDTVs
   CRT HDTVs
   LCD/DLP front projectors
   LCD TV (HDTV ready)
   HDTV STBs with PVR
   Hard-disk-based Video recorders
   Multiformat scan converters
   DVD recorders with progressive scan input support
   AVR receiver

GENERAL DESCRIPTION
The ADV7441A is a high quality Multiformat Video Decoder and Graphics Digitizer with an integrated 2:1 multiplexed HDMI™ receiver.
The ADV7441A contains two main processing sections. The first section is the standard definition processor (SDP), which processes all types of PAL, NTSC, and SECAM signals. The second section is the component processor (CP), which processes YPrPb and RGB component formats, including RGB Graphics. The CP also processes the Video signals from the HDMI receiver. The ADV7441A can keep the HDCP link between a HDMI source and the selected HDMI port active in analog mode operation. This allows for fast switching between the analog and HDMI modes.

GENERAL DESCRIPTION
The ADV7181D is a high quality, single-chip, Multiformat Video Decoder and Graphics Digitizer. This Multiformat Decoder supports the conversion of PAL, NTSC, and SECAM standards in the form of composite or S-Video into a digital ITU-R BT.656 format.
The ADV7181D also supports the decoding of a component RGB/YPrPb Video signal into a digital YCrCb or RGB pixel output stream. Support for component Video includes standards such as 525i, 625i, 525p, 625p, 720p, 1080i, and many other HD and SMPTE standards.

FEATURES
Four 10-bit ADCs sampling up to 75 MHz
10 analog input channels
SCART fast blank support
Internal antialiasing filters
NTSC, PAL, and SECAM color standards supported
525p/625p component progressive scan supported
720p/1080i component HDTV supported
Digitizes RGB Graphics up to 1024 × 768 at 70 Hz (XGA)
3 × 3 color space conversion matrix
Industrial temperature range: −40°C to +85°C
12-bit 4:4:4 DDR, 8-/10-/16-/20-bit SDR pixel output interface
Programmable interrupt request output pin
Small package
Low pin count
Single front end for Video and Graphics
VBI data slicer (including teletext)
Qualified for automotive applications

APPLICATIONS
Automotive entertainment
HDTVs
LCD/DLP® projectors
HDTV STBs with PVR
DVD recorders with progressive scan input support
AVR receivers

GENERAL DESCRIPTION
The ADV7181C is a high quality, single-chip, Multiformat Video Decoder and Graphics Digitizer. This Multiformat Decoder supports the conversion of PAL, NTSC, and SECAM standards in the form of composite or S-Video into a digital ITU-R BT.656 format. The ADV7181C also supports the decoding of a component RGB/YPrPb Video signal into a digital YCrCb or RGB DDR pixel output stream. The support for component Video includes standards such as 525i, 625i, 525p, 625p, 720p, 1080i, and many other HD and SMPTE standards. Graphics digitization is also supported by the ADV7181C; it is capable of digitizing RGB Graphics signals from VGA to SXGA rates and converting
them into a digital DDR RGB or YCrCb pixel output stream. SCART and overlay functionality are enabled by the ability of the ADV7181C to process simultaneously CVBS and standard definition RGB signals. The mixing of these signals is controlled by the fast blank pin.

FEATURES
Four 10-bit ADCs sampling up to 110 MHz
6 analog input channels
SCART fast blank support
Internal antialias filters
NTSC, PAL, SECAM color standards support
525p/625p component progressive scan support
720p/1080i component HDTV support
Digitizes RGB Graphics up to 1280 × 1024 at 60 Hz (SXGA)
3 × 3 color space conversion matrix
Industrial temperature range: −40°C to +85°C
12-bit 4:4:4 DDR, 8-/10-/16-/20-bit SDR pixel output interface
Programmable interrupt request output pin
Small package
Low pin count
Single front end for Video and Graphics

APPLICATIONS
Automotive entertainment
HDTVs
LCD/DLP projectors
HDTV STBs with PVR
DVD recorders with progressive scan input support
AVR receivers

GENERAL DESCRIPTION
The AD9388A is a high quality, single-chip Graphics Digitizer with an integrated 2:1 multiplexed HDMI® receiver.
The AD9388A contains one main component processor (CP) that processes YPrPb and RGB component formats, including RGB Graphics. The CP also processes the Video signals from the HDMI receiver. The AD9388A can keep the HDCP link between an HDMI source and the selected HDMI port active in analog mode operation. This allows for fast switching between the analog and HDMI modes.

FEATURES
   Dual HDMI 1.3 receiver
   HDMI support
      Deep Color support
      xvYCC enhanced colorimetry
      Gamut metadata
   225 MHz HDMI receiver
   Repeater support
   High-bandwidth digital content protection (HDCP 1.3)
   S/PDIF (IEC60958-compatible) digital audio output
   Multichannel I2S audio output (up to 8 channels)
   Adaptive equalizer for cable lengths up to 30 meters
   Internal EDID RAM
   DVI 1.0
   Multiformat Decoder
      Three 10-bit analog-to-digital converters (ADCs)
      ADC sampling rates up to 170 MHz
      Mux with 12 analog input channels
      525i-/625i-component SD support
      525p-/625p-component progressive scan support
      720p-/1080i-/1080p-component HDTV support
      Digitizes RGB Graphics up to 1600 × 1200 at 60 Hz (UXGA)
      VBI data slicer (including teletext)
      Analog-to-HDMI fast switching
   General
      Highly flexible output interface
      STDI function support standard identification
      2 any-to-any, 3 × 3 color-space conversion matrices
      Programmable interrupt request output pins
  
APPLICATIONS
   Advanced TVs
      PDP HDTVs
      LCD TVs (HDTV ready)
      LCD/DLP® rear projection HDTVs
      CRT HDTVs
      LCoS® HDTVs
   Audio/Video receivers (AVRs)
   LCD/DLP front projectors
   HDTV STBs with PVR
   DVD recorders with progressive scan input support

GENERAL DESCRIPTION
The ADV7604 is a high quality, single chip, Multiformat Video Decoder, Graphics Digitizer with an integrated 4:1 multiplexed High-Definition Multimedia Interface (HDMI®) receiver. The ADV7604 contains one main component processor (CP) that processes YPrPb and RGB component formats, including RGB Graphics. The CP also processes the Video signals from the HDMI receiver. The ADV7604 can operate in quad HDMI and analog input mode, thus providing simultaneous HDMI and analog Video sync processing. This allows for fast switching between HDMI and the ADCs.

GENERAL DESCRIPTION
The ADV7184 integrated Video Decoder automatically detects and converts a standard analog baseband television signal, which is compatible with worldwide standards NTSC, PAL, and SECAM, into 4:2:2 component Video data-compatible with 16-bit or 8-bit CCIR601/CCIR656.

FEATURES
Multiformat Video Decoder supports NTSC-(J, M, 4.43), PAL-(B/D/G/H/I/M/N), SECAM
Integrates four 54 MHz, 10-bit ADCs
SCART fast blank support
Clocked from a single 28.63636 MHz crystal
Line-locked clock-compatible (LLC)
Adaptive digital line length tracking (ADLLT™), signal
  processing, and enhanced FIFO management give mini
  TBC functionality
5-line adaptive comb filters
Proprietary architecture for locking to weak, noisy, and unstable Video sources such as VCRs and tuners
Subcarrier frequency lock and status information output
Integrated AGC with adaptive peak white mode
Macrovision® copy protection detection
CTI (chroma transient improvement)
DNR (digital noise reduction)
Multiple programmable analog input formats
  CVBS (composite Video)
  S-Video (Y/C)
  YPrPb component (VESA, MII, SMPTE, and Betacam)
12 analog Video input channels
Integrated antialiasing filters
Automatic NTSC/PAL/SECAM identification
Programmable interrupt request output pin

GENERAL DESCRIPTION
The ADV7181 integrated Video Decoder automatically detects and converts a standard analog baseband television signal compatible with worldwide standards NTSC, PAL, and SECAM into 4:2:2 component Video data compatible with 16-/8-bit CCIR601/CCIR656.

FEATURES
Multiformat Video Decoder supports NTSC-(M, N, 4.43), PAL-(B/D/G/H/I/M/N), SECAM
Integrates three 54 MHz, 9-bit ADCs
Clocked from a single 27 MHz crystal
Line-locked clock compatible (LLC)
Adaptive Digital Line Length Tracking (ADLLT™)
5-line adaptive comb filters
Proprietary architecture for locking to weak, noisy, and unstable Video sources such as VCRs and tuners
Subcarrier frequency lock and status information output
Integrated AGC with adaptive peak white mode
Macrovision® copy protection detection
CTI (chroma transient improvement)
DNR (digital noise reduction)
Multiple programmable analog input formats:
    CVBS (composite Video)
    S-Video (Y/C)
    YPrPb component (VESA, MII, SMPTE, and BetaCam)
6 analog Video input channels
Automatic NTSC/PAL/SECAM identification
Digital output formats (8-bit or16-bit): ITU-R BT.656 YCrCb 4:2:2 output + HS, VS, and FIELD
0.5 V to 1.6 V analog signal input range
Differential gain: 0.6% typ

GENERAL DESCRIPTION
The ADV7189 integrated Video Decoder automatically detects and converts a standard analog baseband television signal compatible with worldwide standards NTSC, PAL, and SECAM into 4:2:2 component Video data compatible with 20-/16-/10-/8-bit CCIR601/CCIR656.

FEATURES
Multiformat Video Decoder supports NTSC-(M,N, 4.43), PAL-(B/D/G/H/I/M/N), SECAM
Integrates three 54 MHz, Noise Shaped Video®, 12-bit ADCs
Clocked from a single 27 MHz crystal
Line-locked clock compatible (LLC)
Adaptive-Digital-Line-Length-Tracking (ADLLT™)
5-line adaptive comb filters
Proprietary architecture for locking to weak, noisy, and unstable Video sources such as VCRs and tuners
Subcarrier frequency lock and status information output
Integrated AGC with adaptive peak white mode
Macrovision® copy protection detection
CTI (chroma transient improvement)
DNR (digital noise reduction)
Multiple programmable analog input formats:
  CVBS (composite Video)
  S-Video (Y/C)
  YPrPb component (VESA, MII, SMPTE, and BetaCam)
12 analog Video input channels
Automatic NTSC/PAL/SECAM identification
Digital output formats (8-bit/10-bit/16-bit/20-bit): ITU-R BT.656 YCrCb 4:2:2 output + HS, VS, and FIELD
0.5 V to 1.6 V analog signal input range
Differential gain: 0.4% typ
Differential phase: 0.4° typ
Programmable Video controls: Peak-white/hue/brightness/saturation/contrast
Integrated on-chip Video timing generator
Free run mode (generates stable Video ouput with no I/P)
VBI decode support for Close captioning, WSS, CGMS, EDTV, Gemstar® 1×/2×
Power-down mode
2-wire serial MPU interface (I2C® compatible)
3.3 V analog, 1.8 V digital core; 3.3 V IO supply
80-lead LQFP Pb-free package

APPLICATIONS
High end DVD recorders
Video projectors
HDD-based PVRs/DVDRs
LCD TVs
Set-top boxes
Professional Video products
AVR receiver

The BCM7413 is a Multiformat IPTV System on a Chip (SoC) that is optimized to support SD and ED output resolutions, HDMIv.1.3/HDCP1.2 (up to 480p/576p) and Video DAC support for S-Video and composite Video. It also supports dual-SD decode with Picture-in-Picture (PIP) output.

The BCM7413 combines a fast CPU, high-speed 2D and 3D Graphics processing including Video scaling and motion adaptive deinterlacing, a very flexible data transport processor, an HD Multiformat digital Video Decoder, a programmable audio Decoder, six Video DACs, stereo high-fidelity audio DACs, dual Fast Ethernet ports, triple USB 2.0, a PCI 2.3, a high-speed DDR2 800 MHz memory controller and a peripheral control unit that provides a variety of set-top box control functions.