datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : 2-Wire Serial 2K-bits (256 x 8) CMOS Electrically Erasable PROM

2-Wire Serial 2K-bits (256 x 8) CMOS Electrically Erasable PROM

Description : 2-Wire Serial 2K-bits (256 x 8) CMOS Electrically Erasable PROM

[Analog-Technology]

2-Wire Serial 2K-bits (256 x 8) CMOS Electrically Erasable PROM

Description : 2048-bits Serial Electrically Erasable PROM

General Description
The AM93LC56 is the 2048-bit non-volatile Serial EEPROM. It is manufactured by using ATCs advanced CMOS EEPROM technology. The AM93LC56 provides efficient non-volatile read/write memory arranged as 128 words of 16 bits each when the ORG Pin is connected to VCC and 256 words of 8 bits each when it is tied to ground. The instruction set includes read, write, and write enable/disable functions. The data out pin (DO) indicates the status of the device during the self-timed non-volatile programming cycle.

Features
• State-of-the-art architecture
   - Non-volatile data storage
   - Standard voltage and low voltage operation Vcc: 2.7V ~ 5.5V
   - Full TTL compatible inputs and outputs
   - Auto increment read for efficient data dump
• Hardware and software write protection
   - Defaults to write-disabled state at power up
   - Software instructions for write-enable/disable
   - VCC level verification before self-timed programming cycle
• Advanced low voltage CMOS EEPROM technology
• Versatile, easy-to-use interface
   - Self-timed programming cycle
   - Automatic erase-before-write
   - Programming status indicator
   - Word and chip Erasable
   - Stop SK anytime for power savings
• Durability and reliability
   - 40 years data retention
   - Minimum of 1M write cycles per word
   - Unlimited read cycles
   - ESD protection

Description : 2048-bits Serial Electrically Erasable PROM

General Description
The AM93LC56 is the 2048-bit non-volatile Serial EEPROM. It is manufactured by using ATCs advanced CMOS EEPROM technology. The AM93LC56 provides efficient non-volatile read/write memory arranged as 128 words of 16 bits each when the ORG Pin is connected to VCC and 256 words of 8 bits each when it is tied to ground. The instruction set includes read, write, and write enable/disable functions. The data out pin (DO) indicates the status of the device during the self-timed non-volatile programming cycle.

Features
• State-of-the-art architecture
   - Non-volatile data storage
   - Standard voltage and low voltage operation Vcc: 2.7V ~ 5.5V
   - Full TTL compatible inputs and outputs
   - Auto increment read for efficient data dump
• Hardware and software write protection
   - Defaults to write-disabled state at power up
   - Software instructions for write-enable/disable
   - VCC level verification before self-timed programming cycle
• Advanced low voltage CMOS EEPROM technology
• Versatile, easy-to-use interface
   - Self-timed programming cycle
   - Automatic erase-before-write
   - Programming status indicator
   - Word and chip Erasable
   - Stop SK anytime for power savings
• Durability and reliability
   - 40 years data retention
   - Minimum of 1M write cycles per word
   - Unlimited read cycles
   - ESD protection

Part Name(s) : HN462716 HN462716G
Hitachi
Hitachi -> Renesas Electronics
Description : 2048-word x 8-bit UV Erasable and Electrically Programmable Only Memory

2048-word x 8-bit UV Erasable and Electrically Programmable Only Memory

The HN462716 is a 2048 word by 8 bit Erasable and Electrically programmable ROMs. This device is packaged in a 24-pin dual-in-line package with transparent lid. The transparent lid allows the usre to expose the chip to ultraviolet light to erase the bit pattern, whereby a new pattern can then be written into the device.

Description : 2-Wire Serial 16K-bits (2048 x 8) CMOS Electrically Erasable PROM

General Description
The AM24LC16 is a non-volatile, 16384-bit Serial EEPROM with enhanced security device and conforms to all specifications in I2C 2 wire protocol. The whole memory can be disabled (Write Protected) by connecting the WP pin to Vcc. This section of memory then becomes unalterable unless WP is switched to Vss. The AM24LC16s communication protocol uses CLOCK (SCL) and DATA I/O (SDA) lines to synchronously clock data between the master (for example: a microcomputer)and the slave EEPROM devices (s).

Features
• State- of- the- Art Architecture
    - Non-volatile data storage
    - Full range Vcc = 2.7V to 5.5V
• 2 wire I2C Serial interface
    - Provides bi-directional data transfer protocol
• Hard-ware Write Protection
    - With WP PIN to disable programming command
• 16 bytes page write mode
    - Minimizes total write time per word
• Self-timed write-cycle(including auto-erase)
• Durable and Reliable
    - 40 years data retention
    - Minimum of 1M write/erase cycles per word
    - Unlimited read cycles
    - ESD protection
• Low standby current
• Package: PDIP-8L, SOP-8L

Description : 2-Wire Serial 16K-bits (2048 x 8) CMOS Electrically Erasable PROM

General Description
The AM24LC16 is a non-volatile, 16384-bit Serial EEPROM with enhanced security device and conforms to all specifications in I2C 2 wire protocol. The whole memory can be disabled (Write Protected) by connecting the WP pin to Vcc. This section of memory then becomes unalterable unless WP is switched to Vss. The AM24LC16s communication protocol uses CLOCK (SCL) and DATA I/O (SDA) lines to synchronously clock data between the master (for example: a microcomputer)and the slave EEPROM devices (s).

Features
• State- of- the- Art Architecture
    - Non-volatile data storage
    - Full range Vcc = 2.7V to 5.5V
• 2 wire I2C Serial interface
    - Provides bi-directional data transfer protocol
• Hard-ware Write Protection
    - With WP PIN to disable programming command
• 16 bytes page write mode
    - Minimizes total write time per word
• Self-timed write-cycle(including auto-erase)
• Durable and Reliable
    - 40 years data retention
    - Minimum of 1M write/erase cycles per word
    - Unlimited read cycles
    - ESD protection
• Low standby current
• Package: PDIP-8L, SOP-8L

Description : 4096-bits Serial Electrically Erasable PROM

General Description
The AM93LC66 is the 4096-bit non-volatile Serial EEPROM. It is manufactured by using ATCs advanced CMOS EEPROM technology. The AM93LC66 provides efficient non-volatile read/write memory arranged as 256 words of 16 bits each when the ORG Pin is connected to VCC and 512 words of 8 bits each when it is tied to ground. The instruction set includes read, write, and write enable/disable functions. The data out pin (DO) indicates the status of the device during the self-timed non-volatile programming cycle.

Features
• State-of-the-art architecture
   - Non-volatile data storage
   - Standard voltage and low voltage operation Vcc: 2.7V ~ 5.5V
   - Full TTL compatible inputs and outputs
   - Auto increment read for efficient data dump
• Hardware and software write protection
   - Defaults to write-disabled state at power up
   - Software instructions for write-enable/disable
   - VCC level verification before self-timed programming cycle
• Advanced low voltage CMOS EEPROM technology
• Versatile, easy-to-use interface
   - Self-timed programming cycle
   - Automatic erase-before-write
   - Programming status indicator
   - Word and chip Erasable
   - Stop SK anytime for power savings
• Durability and reliability
   - 40 years data retention
   - Minimum of 1M write cycles per word
   - Unlimited read cycles
   - ESD protection

Part Name(s) : BR93LL46F BR93LL46FV
ROHM
ROHM Semiconductor
Description : 1,024-Bit Serial Electrically Erasable PROM

The BR93LC46F and BR93LL46FV are CMOS Serial input / output-type memory circuits (EEPROMs) that can be programmed Electrically. Each is configured of 64 words× 16 bits (1,024 bits), and each word can be accessed individually and data read from it and written to it. Operation control is performed using five types of commands. The commands, addresses, and data are input through the DI pin under the control of the CS and SK pins. In a write operation, the internal status signal (READY or BUSY) can be output from the DO pin.

Description : 1024-bits Serial Electrically Erasable PROM

[Analog-Technology]

General Description
The AM93LC46 is a 1024-bit, non-volatile, Serial EEPROM. It is manufactured by using ATCs advanced CMOS EEPROM technology. The AM93LC46 provides efficient non-volatile read/write memory arranged as 64 registers of 16 bits each. Seven 9-bit instructions control the operation of the device, which includes read, write, and write enable/disable functions. The data out pin (DO) indicates the status of the device during the self-timed non-volatile programming cycle.

Features
• State-of-the-art architecture
   - Non-volatile data storage
   - Operating voltage Vcc: 2.7~ 5.5V
   - Full TTL compatible inputs and outputs
   - Auto increment read for efficient data dump
• Hardware and software write protection
   - Defaults to write-disabled state at power up
   - Software instructions for write-enable/disable
   - Vcc level verification before self-timed programming cycle.
• Advanced low voltage CMOS EEPROM technology
• Versatile, easy-to-use interface
   - Self-timed programming cycle
   - Automatic erase-before-write
   - Programming status Indicator
   - Word and chip Erasable
   - Stop SK anytime for power savings
• Durability and reliability
   - 40 year data retention
   - Minimum of 1M write cycles
   - Unlimited read cycles
   - ESD protection

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]