P/N + Description + Content Search

DESIGN
The Capacitors consist of a Ceramic Disc both sides of which are silver-plated. Connection leads are made of tinned copper having a diameter of 0.6 mm or 0.8 mm up to 3 kV and 0.8 mm for 6 kV.
The Capacitors may be supplied with kinked or straight leads with a lead spacing of 5 mm (0.20"), 7.5 mm (0.30") or 10 mm (0.40") and a lead length from 4 mm to 30 mm. The standard tolerance on capacitance is 5 % or 10 % for Class 1 Capacitors and ± 10 % or ± 20 % for Class 2 Capacitors. Encapsulation is made of gold-colored epoxy-resin, flammable resistant in accordance with “UL 94 V-0”

FEATURES
• Low losses
• High stability
• High capacitance in small size
• Kinked (preferred) or straight leads
• Compliant to RoHS directive 2002/95/EC

APPLICATIONS
• DC high voltage
• Pulse high voltage
• SMPS
• HV power supply
• HF ballast

[muRata]

Chip Multilayer Ceramic Capacitors for General Purpose

■ Scope
This product specification is applied to Chip Multilayer Ceramic Capacitors used for General Electronic equipment.

[MALLORY]

General Purpose Disc Ceramic Capacitors

1000V Ceramic Disc

The 90000 series is a range of insulated Disc, monolythic fixed Ceramic Capacitors. They are most commonly used in consumer electronics and telecommunication equipment.

General Purpose Capacitors
Type G General Purpose Disc Ceramic Capacitors are an ideal choice for low cost, small size and low to high DC voltage, General Purpose, coupling, by-pass and filtering applications.

Highlights
• Small size
• Conformally coated
• Radial leads
• General Purpose
• Long leads

AC Line Rated Ceramic Disc Capacitors
Class X1, 400 VAC / Class Y4, 125 VAC
   
FEATURES
• Complying with IEC 60384-14 3rd edition
• High reliability
• Complete range of capacitance values
• Radial leads
• Singlelayer AC Disc safety Capacitors
• Material categorization: for definitions of compliance
    please see www.vishay.com/doc?99912
   
APPLICATIONS
• X1, Y4 according to IEC 60384-14.3
• Across-the-line
• Line by-pass
• Antenna coupling
   

■ Scope
This product specification is applied to Chip Multilayer Ceramic Capacitors used for General Electronic equipment.

EIA Class 1 Temperature Compensating Capacitors

EIA Class 1 temperature compensating Capacitors are ideal for timing and oscillating circuits. They are conformally coated with one inch minimum radial leads. EIA Class 1 Temperature Compensating Capacitors

Highlights
• Small size
• Conformally coated
• Radial leads
• Temperature compensating

Reduced Titanite Disc Ceramic Capacitors

EIA Class 3 reduced titanite Disc Ceramic Capacitors are ideal for use in transistorized circuity for bypass and coupling applications.

Highlights
• High Capacitance
• Low power factor
• Superior radio frequency impedance
• Meets RS-198C for Class 3 Ceramic Capacitors
• Radial leads

DESIGN
The Capacitors consist of a Ceramic Disc of which both sides are silver-plated. Connection leads are made of tinned copper having a diameter of 0.032" (0.81 mm) or 0.025" (0.64 mm). The Capacitors may be supplied with radial kinked or straight leads having a lead spacing of 0.375" (9.5 mm) or 0.250" (6.4 mm). The standard tolerance is ± 20 %. Coating is made of flame retardant epoxy resin in accordance with “UL 94 V-0.”

FEATURES
• Complying with IEC 60384-14 3rd edition
• High reliability
• Complete range of capacitance values
• Radial leads
• Singlelayer AC Disc safety Capacitors
• Material categorization: For definitions of compliance please see www.vishay.com/doc?99912

APPLICATIONS
• X1/Y2 according to IEC 60384-14.3
• Across-the-line
• Line by-pass
• Antenna coupling