datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
MACOM
Tyco Electronics
Description : High Performance Amplifier, 15 dB Gain, 5 - 200 MHz

Description
M/A-COM’s AM-134 is a coupler feedback amplifier with High intercept and compression points. The use of coupler feedback minimizes noise figure and current in a High intercept amplifier. This amplifier is packaged in a flatpack with flanges. Due to the internal power dissipation the thermal rise should be minimized. The ground plane on the PC board should be configured to remove heat from under the package. AM-134 is ideally suited for use where a High intercept, High reliability amplifier is required.

Features
■ +49 dBm Typical Midband Third Order Intercept
■ +29 dBm Typical Midband 1 dB Compression
■ 4.8 dB Typical Midband Noise Figure

Part Name(s) : BGR269
NXP
NXP Semiconductors.
Description : 200 MHz, 35 dB gain reverse amplifier

General description
High Performance amplifier in a SOT115J package, operating at a voltage supply of 24 V (DC).

Features and benefits
■ Excellent linearity
■ Silicon nitride passivation
■ Rugged construction
■ Gold metallization ensures excellent reliability
■ 35 dB amplification up to 200 MHz

Applications
■ Reverse amplifier in two-way CATV systems operating in the 5 MHz to 200 MHz frequency range

MACOM
Tyco Electronics
Description : High Performance Amplifier, 10 dB Gain, 5 - 200 MHz

Description
M/A-COM’s AM-132 is a coupler feedback amplifier with High intercept and compression points. The use of coupler feedback minimizes noise figure and current in a High intercept amplifier. This amplifier is packaged in a flatpack with flanges. Due to the internal power dissipation the thermal rise should be minimized. The ground plane on the PC board should be configured to remove heat from under the package. AM-132 is ideally suited for use where a High intercept, High reliability amplifier is required.

Features
■ +49 dBm Typical Midband Third Order Intercept
■ +29 dBm Typical Midband 1 dB Compression
■ 4.5 dB Typical Midband Noise Figure

MACOM
Tyco Electronics
Description : High Performance Amplifier, 20 dB Gain, 10 - 200 MHz

Description
M/A-COM’s AM-136 is a coupler feedback amplifier with High intercept and compression points. The use of coupler feedback minimizes noise figure and current in a High intercept amplifier. This amplifier is packaged in a flatpack with flanges. Due to the internal power dissipation the thermal rise should be minimized. The ground plane on the PC board should be configured to remove heat from under the package. AM-136 is ideally suited for use where a High intercept, High reliability amplifier is required.

Features
■ +49 dBm Typical Midband Third Order Intercept
■ +29 dBm Typical Midband 1 dB Compression
■ 4.8 dB Typical Midband Noise Figure

MACOM
Tyco Electronics
Description : High Performance Amplifier, 25 dB Gain, 10 - 200 MHz

Description
M/A-COM’s AM-138 is a coupler feedback amplifier with High intercept and compression points. The use of coupler feedback minimizes noise figure and current in a High intercept amplifier. This amplifier is packaged in a flatpack with flanges. Due to the internal power dissipation the thermal rise should be minimized. The ground plane on the PC board should be configured to remove heat from under the package. AM-138 is ideally suited for use where a High intercept, High reliability amplifier is required.

Features
■ +49 dBm Typical Midband Third Order Intercept
■ +25 dBm Typical Midband 1 dB Compression
■ 5.3 dB Typical Midband Noise Figure

MACOM
Tyco Electronics
Description : High Performance Amplifier, 29 dB Gain, 10 - 200 MHz

Description
M/A-COM’s AM-140 is a coupler feedback amplifier with High intercept and compression points. The use of coupler feedback minimizes noise figure and current in a High intercept amplifier. This amplifier is packaged in a flatpack with flanges. Due to the internal power dissipation the thermal rise should be minimized. The ground plane on the PC board should be configured to remove heat from under the package. AM-140 is ideally suited for use where a High intercept, High reliability amplifier is required.

Features
■ +47 dBm Typical Midband Third Order Intercept
■ +28 dBm Typical Midband 1 dB Compression
■ 5.4 dB Typical Midband Noise Figure

Part Name(s) : BGY67
NXP
NXP Semiconductors.
Description : 200 MHz, 22 dB gain reverse amplifier

General description
Hybrid amplifier module for CATV systems operating over a frequency range of 5 MHz to 200 MHz at a voltage supply of 24 V (DC). The device is intended as a reverse amplifier for use in two-way systems.

Features and benefits
■ Excellent linearity
■ Extremely low noise
■ Silicon nitride passivation
■ Rugged construction
■ TiPtAu metallized crystals ensure optimal reliability

Part Name(s) : BGY67A
Philips
Philips Electronics
Description : 200 MHz, 24 dB gain reverse amplifier

General description
Hybrid High dynamic range amplifier module in a SOT115J package operating at a voltage supply of 24 V (DC).

Features
■ Excellent linearity
■ Extremely low noise
■ Silicon nitride passivation
■ Rugged construction
■ TiPtAu metallized crystals ensure optimal reliability

Applications
■ Reverse amplifier in two-way CATV systems in the 5 MHz to 200 MHz frequency range

Part Name(s) : BGY67A
NXP
NXP Semiconductors.
Description : 200 MHz, 24 dB gain reverse amplifier

General description
Hybrid High dynamic range amplifier module in a SOT115J package operating at a voltage supply of 24 V (DC).

Features and benefits
■ Excellent linearity
■ Extremely low noise
■ Silicon nitride passivation
■ Rugged construction
■ TiPtAu metallized crystals ensure optimal reliability

Applications
■ Reverse amplifier in two-way CATV systems in the 5 MHz to 200 MHz frequency range

Part Name(s) : CA2832 CA2832C
Motorola
Motorola => Freescale
Description : 35.5 dB 1–200 MHz 1.6 WATT WIDEBAND LINEAR AMPLIFIER

The RF Line
Wideband Linear Amplifier

. . . designed for amplifier applications in 50 to 100 ohm systems requiring wide bandwidth, low noise and low distortion. This hybrid provides excellent gain stability with temperature and linear amplification as a result of the push–pull circuit design.

• Specified Characteristics at VCC = 28 V, TC = 25°C:
    Frequency Range — 1 to 200 MHz
    Output Power — 1580 mW Typ @ 1 dB Compression, f = 200 MHz
    Power Gain — 35.5 dB Typ @ f = 100 MHz
    PEP — 900 mW Typ @ –32 dB IMD
    Noise Figure — 5 dB Typ @ f = 200 MHz
    ITO — 47 dBm @ f = 200 MHz
• All Gold Metallization for Improved Reliability
• Unconditional Stability Under All Load Conditions

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]