datasheetbank_Logo
Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site

P/N + Description + Content Search

Search Word's :
Description : Snap Action Switch

General Purpose Snap Action Switch

• Industry standard design with switching currents of 10A to 21A
• Widely used for applications where long life expectancy and high reliability is required.
• Choose from a variety of levers, terminals and operating forces.
• Right and Left Barrier options are available for the V-21 and V-16 models
• Heat resistant versions of the V-15 and V-10 are available.
• RoHS Compliant

Description : Small Signal Zener Diodes

Features
• These diodes are also available in other case styles and other configurations including: the SOD-123 case with type designation BZT52 series, the dual zener diode common anode configuration in the SOT-23 case with type designation AZ23 series and the dual zener diode common cathode configuration in the SOT-23 case with type designation DZ23 series.
• The Zener voltages are graded according to the international E 24 standard. Standard Zener voltage tolerance is ± 5 %. Replace "C" with "B" for ± 2 % tolerance.
• Silicon Planar Power Zener Diodes
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC

Description : 5 PIN DIP RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER

Description
The EL301X(P5), EL302X(P5) and EL305X(P5) series of devices each consist of a GaAs infrared emitting diode optically coupled to a monolithic silicon random phase photo Triac.
They are designed for interfacing between electronic controls and power triacs to control resistive and inductive loads for 115 to 240 VAC operations. .

Features:
• Peak breakdown voltage
    - 250V: EL301X(P5)
    - 400V: EL302X(P5)
    - 600V: EL305X(P5)
• High isolation voltage between input and output (Viso=5000 V rms )
• Compact dual-in-line package
• Pb free and RoHS compliant.
• UL approved (No. E214129)
• VDE approved (No.132249)
• SEMKO approved
• NEMKO approved
• DEMKO approved
• FIMKO approved
• CSA approved
• CQC approved

Applications
• Solenoid/valve controls
• Lamp ballasts
• Static AC power switch
• Interfacing microprocessors to 115 to 240Vac peripherals
• Incandescent lamp dimmers
• Temperature controls
• Motor controls

Description : 6 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER

Description
The 4N2X, 4N3X, H11AX series of devices each consist of an infrared emitting diode optically coupled to a phototransistor.
They are packaged in a 6-pin DIP package and available in wide-lead spacing and SMD option.

Features:
• 4N2X series: 4N25, 4N26, 4N27, 4N28
• 4N3X series: 4N35, 4N36, 4N37, 4N38
• H11AX series: H11A1, H11A2, H11A3, H11A4, H11A5
• High isolation voltage between input and output
   (Viso=5000 Vrms)
• Creepage distance >7.6mm
• Operating temperature up to +110°C
• Compact dual-in-line package
• Pb free and RoHS compliant.
• UL approved (No. E214129)
• VDE approved (No. 132249)
• SEMKO approval pending
• NEMKO approval pending
• DEMKO approval pending
• FIMKO approval pending
• CSA approval pending

Applications
• Power supply regulators
• Digital logic inputs
• Microprocessor inputs

Description : Small Signal Zener Diodes

FEATURES
• Silicon planar power Zener diodes
• Standard Zener voltage tolerance is ± 5 % with a “B” suffix (e.g.: MMSZ5225B-V), suffix “C” is ± 2 % tolerance
• These diodes are also available in MiniMELF case with the designation TZM5225 to TZM5267, DO-35 case with type designation 1N5225 to 1N5267 and SOT-23 case with the type designation MMBZ5225-V to MMBZ5267-V
• AEC-Q101 qualified
• Material categorization: For definitions of compliance please see www.vishay.com/doc?99912

Description : Small Signal Zener Diodes, Dual

FEATURES
• These diodes are also available in other case
   styles and configurations including: the dual
   diode common cathode configuration with type
   designation DZ23, the single diode SOT-23
   case with the type designation BZX84C, and the
   single diode SOD-123 case with the type
   designation BZT52C
• Dual silicon planar Zener diodes, common anode
• The Zener voltages are graded according to the international E 24 standard
• The parameters are valid for both diodes in one case. ΔVZ and Δrzj of the two diodes in one case is ≤ 5 %
• Lead (Pb)-free component
• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC

Description : OSCILLATOR

[ECLIPTEK CORP.]

• RoHS Compliant (Pb-free)
• HCMOS/TTL output
• 5.0V supply voltage
• 14 pin DIP package
• Stability to ±20ppm
• Custom lead length, gull wing options available

 

Description : 6 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER

Description
The CNY17-X and CNY17F-X series of devices each consist of an infrared emitting diode optically coupled to a phototransistor.
They are packaged in a 6-pin DIP package and available in wide-lead spacing and SMD option.

Features
• Current transfer ratios in selected narrow range groups
   CNY17-1, CNY17F-1: 40-80%
   CNY17-2, CNY17F-2: 63-125%
   CNY17-3, CNY17F-3: 100-200%
   CNY17-4, CNY17F-4:160-320%
• High isolation voltage between input and output
   (Viso = 5000 Vrms)
• Creepage distance > 7.6 mm
• Operating temperature up to +110°C
• The CNY17F-X series offers no external base connection
   for minimum noise susceptibility
• Compact dual-in-line package
• Pb free and RoHS compliant.
• UL approved (No. E214129)
• VDE approved (No. 132249)
• SEMKO approved (No. 716108 /No. 716109)
• NEMKO (No. P06206747)
• DEMKO (No. 313924)
• FIMKO (No. FI 22807)
• CSA approved (No.1969132)

Applications
• Power supply regulators
• Digital logic inputs
• Microprocessor inputs

Description : Metallized Polyester Film Capacitors, Wrap-and-Fill

FEATURES
• Economical
• Extensive standard ratings
• Rugged construction
• Small size
• Compliant to RoHS directive 2002/95/EC

Description : 16/20A HIGH CURRENT, SNAP-IN/FLANGE MOUNT FILTER WITH IEC 60320 AC INLET SOCKET.

FEATURES
The PBH series offers filters for application that have high current (16/20A) requirements. The filters are available with different configurations of components and termination styles. These filters are available in flange mount and snap-in type. The medical graded filters offer excellent performance with maximum leakage current of 2µA at 120VAC, 60Hz.
A ground choke can be added to enhance the grounding ability of the circuit. Bleeder resistor can also be added to prevent excessive voltages from developing across the filter capacitors when there is no load.

APPLICATIONS
   Computer & networking equipment, Measuring & control equipment, Data processing equipment,  laboratory instruments, Switching power supplies, other electronic equipment.

TECHNICAL DATA
• Rated Voltage: 115/250VAC
• Rated Current: 16A, 20A
• Power Line Frequency: 50/60Hz
• Max. Leakage Current each
   Line to Ground:
      @ 115VAC 60Hz: 0.25mA
      @ 250VAC 50Hz: 0.50mA
      @ 115VAC 60Hz: 2µA*
      @ 250VAC 50Hz: 5µA*
• Hipot Rating (one minute)
   Line to Ground: 2250VDC
   Line to Line: 1450VDC
• Temperature Range: -25C to +85C
   ✛ SEMKO, VDE approved to 16A

12345678910 Next

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]