Introduction This Sensor FG-R05-3A is a high-sensitivity DC/AC Current Sensor that can detect leakage Current of DC and AC. If DC fault occurs, PIN 4 will change state from low level to high impedance. If AC fault occurs, PIN5 will change state form low level to high impedance. This Sensor has a test coil for testing the operation of the Sensor, and by inputting a signal from the outside it is possible to pass a test Current to the test coil. It also outputs a digital signal informing that leakage Current of DC/AC has been detected.
Features ● For IC-CPD to the standard IEC 62752:2016 ● UL2231(CCID20) ● Open-loop, Flux-gate type Current Sensor ● PCB mounting ● Digital output of fault detection
DESCRIPTION the IC of OEM integrated pressure Sensor combines state-ofthe-art pressure Sensor technology with signal conditioning to produce a fully signal-conditioned, amplifi ed, temperature compensated Sensor. the Sensor utilizes a digital signal processor to allow multiorder linear correction to achieve increased acc.racy over conventional amplifi ed pressure systems. the device is a cointegrated die. It is also available as an IC without the Sensor and is therefore suitable for the use of a precision signal processor for separate Sensors.
FEATURES ► Supply voltage VDD 5V ► Amplified, calibrated, fully signal conditioned output of 4.0 VDC FS span (0.5 to 4.5V signal) ► Output ratiometric with supply voltage ► Digital Signal Processor for correction algorithms ► Multi-order temperature compensation for gain and offset ► For gauge, Differential, and absolute applications ► Adjustable output clamps ► Programmable output filter ► EEPROM memory for End-of-line calibration ► – 40°C to + 125°C operating temperature ► Available packages: ► ASICplus: SO16w body with nozzle ► bare die ► customer specific