P/N + Description + Content Search

DESCRIPTION
The TSSP930.. device is the latest generation of compact infrared detector Module for presence, Proximity, or Light curtain applications. They provide an active low output in response to infrared bursts at 940 nm. The frequency of the burst should correspond to the carrier frequency shown in the parts table.
This component has not been qualified according to automotive specifications.

FEATURES
• Up to 2 m for presence and Proximity sensing
• Up to 20 m distance for Light curtain application
• Uses continuous AC signal or burst pattern of
   infrared Light
• Small sensitivity scattering range
• PIN diode and Sensor IC in one package
• Low supply current
• Shielding against EMI
• Visible Light is suppressed by IR filter
• Insensitive to supply voltage ripple and noise
• Supply voltage: 2.0 V to 3.6 V
• Material categorization: for definitions of compliance
   please see www.vishay.com/doc?99912

APPLICATIONS
• Reflective Sensors for hand dryers, towel or soap
   dispensers, water faucets, toilet flush
• Vending machine fall detection
• Security and pet gates
• Person or object vicinity switch
• Fast Proximity Sensors for toys, robotics, drones, and
   other consumer and industrial uses

DESCRIPTION
The TSSP77038 is a compact infrared detector Module for presence sensing applications. It receives 38 kHz modulated signals and has a peak sensitivity of 940 nm.
This component has not been qualified according to automotive specifications.

FEATURES
• Up to 2 m for presence sensing
• Uses modulated bursts at 38 kHz
• 940 nm peak wavelength
• PIN diode and Sensor IC in one package
• Low supply current
• Shielding against EMI
• Visible Light is suppressed by IR filter
• Insensitive to supply voltage ripple and noise
• Supply voltage: 2.5 V to 5.5 V
• Material categorization: for definitions of compliance
   please see www.vishay.com/doc?99912

APPLICATIONS
• Reflective Sensors for hand dryers, towel or soap
   dispensers, water faucets, toilet flush
• Vending machine fall detection
• Security and pet gates
• Person or object vicinity activation

DESCRIPTION
The TSSP4038 is a compact IR receiver for Sensor applications. It has a high gain for IR signals at 38 kHz. The detection level does not change when ambient Light or strong IR signals are applied. It can receive continuous 38 kHz signals or 38 kHz bursts.
This component has not been qualified according to automotive specifications.

FEATURES
• Low supply current
• Photo detector and preamplifier in one package
• Internal filter for 38 kHz IR signals
• Shielding against EMI
• Supply voltage: 2.5 V to 5.5 V
• Visible Light is suppressed by IR filter
• Insensitive to supply voltage ripple and noise
• Material categorization: for definitions of compliance
   please see www.vishay.com/doc?99912

DESCRIPTION
The TSSP60.. series are compact infrared detector Modules for presence and Fast Proximity sensing applications. They provide an active low output in response to infrared bursts at 940 nm. The frequency of the burst should correspond to the carrier frequency shown in the parts table.
This component has not been qualified according to automotive specifications.

FEATURES
• Presence Sensor: up to 2 m distance,
   find more info at: www.vishay.com/doc?49009
• Light barrier: up to 12 m distance, TSAL6200
   with IF = 50 mA,
   find more info at: www.vishay.com/doc?49650
• Fast Proximity: up to 2 m range at 5 ms
   response time,
   find more info at: www.vishay.com/doc?82741
• Supply voltage: 2.5 V to 5.5 V
• Material categorization: for definitions of
   compliance please see www.vishay.com/doc?99912

APPLICATIONS
• Reflective Sensors for hand dryers, towel or soap
   dispensers, water faucets, toilet flush
• Vending machine fall detection
• Security and pet gates
• Person or object vicinity switch
• Fast Proximity Sensors for toys, robotics, drones, and
   other consumer and industrial uses

Low Power Ambient Light and Proximity Sensor with Enhanced Infrared Rejection

The ISL29038 is a low power Ambient Light Sensor (ALS) and Proximity (PROX) Sensor. It has a built-in IR-LED driver for Proximity function. The ALS function measures the amount of Light (in the visible spectrum) incident on the ISL29038.
The ALS function has a programmable ambient IR-rejection, which allows fine tuning of Light source variations and is ideal for Light Sensor applications under dark protective glass. The ALS provides a 12-bit measurement. A passive optical filter removes unwanted wavelengths (IR or Ultraviolet) to ensure accurate ALS measurement.

Features
• Ideal for applications under dark or tinted glass
• Enhanced ambient sunLight rejection to 40k Lux
• Programmable Proximity sleep time between Proximity
   measurements optimizes power consumption
• Hardware interrupt - no polling required
• Programmable IR compensation to fine tune ALS
   performance for various glass compositions
• Up to 4000 Lux, four selectable ALS ranges
• Programmable IR LED drive current to 250mA
• Operates from 2.25V to 3.63V VDD
• Power Down IDD, typical 0.2µADC
• Tiny 2.1x2.0x0.7 (mm) ODFN package

Applications
• Display dimming and adjustment
   - Mobile devices: smart phones, PDA, GPS
   - Computing: monitors, laptops, notebooks
   - Picture frames, tablet-PCs, LCD-TV
• Object detection
   - Touchscreen disabling
   - Smart power-saving

Low Power Ambient Light and Proximity Sensor with Enhanced Infrared Rejection

The ISL29038 is a low power Ambient Light Sensor (ALS) and Proximity (PROX) Sensor. It has a built-in IR-LED driver for Proximity function. The ALS function measures the amount of Light (in the visible spectrum) incident on the ISL29038.
The ALS function has a programmable ambient IR-rejection, which allows fine tuning of Light source variations and is ideal for Light Sensor applications under dark protective glass. The ALS provides a 12-bit measurement. A passive optical filter removes unwanted wavelengths (IR or Ultraviolet) to ensure accurate ALS measurement.

Features
• Ideal for applications under dark or tinted glass
• Enhanced ambient sunLight rejection to 40k Lux
• Programmable Proximity sleep time between Proximity
   measurements optimizes power consumption
• Hardware interrupt - no polling required
• Programmable IR compensation to fine tune ALS
   performance for various glass compositions
• Up to 4000 Lux, four selectable ALS ranges
• Programmable IR LED drive current to 250mA
• Operates from 2.25V to 3.63V VDD
• Power-down IDD, typical 0.2µADC
• Tiny 2.1x2.0x0.7 (mm) ODFN package

Applications
• Display dimming and adjustment
   - Mobile devices: smart phones, PDA, GPS
   - Computing: monitors, laptops, notebooks
   - Picture frames, tablet_PCs, LCD_TV
• Object detection
   - Touchscreen disabling
   - Smart power-saving

General Description
The device is an advanced Proximity Sensor. The slim Module incorporates an IR LED and factory calibrated LED driver. The Proximity detection feature provides object detection (e.g. mobile device screen to user’s ear) by photodiode detection of reflected IR energy (sourced by the integrated LED).
Detect/release events are interrupt driven, and occur when Proximity result crosses upper and/or lower threshold settings.
The Proximity engine features offset adjustment registers to compensate for unwanted IR energy reflection at the Sensor. Proximity results are further improved by automatic ambient Light subtraction.

Features
• Small footprint and low profile package
• 3.10 x 2.00 x 1.00 mm
• 0.18μm process technology with 1.8V I²C bus

Benefits
• Reduced board space requirements and
   enables low-profile system design
• Reduced power consumption

Applications
   The TMD2620 is ideal for mobile phone touch screen disable.

DESCRIPTION
The TSSP58P38 is a compact infrared detector Module for Proximity sensing application. It receives 38 kHz modulated signals and has a peak sensitivity of 940 nm.
The length of the detector’s output pulse varies in proportion to the amount of Light reflected from the object being detected.

FEATURES
• Up to 2 m for Proximity sensing
• Receives 38 kHz modulated signal
• 940 nm peak wavelength
• Photo detector and preamplifier in one package
• Low supply current
• Shielding against EMI
• Visible Light is suppressed by IR filter
• Insensitive to supply voltage ripple and noise
• Supply voltage: 2.5 V to 5.5 V
• Material categorization: for definitions of compliance
   please see www.vishay.com/doc?99912

APPLICATIONS
• Safety switches for garage door, elevator door, gates, and
   industrial Light curtains
• Reflective Sensors for toilet, urinal, faucet and hand dryer,
   and towel dispenser
• Navigational Sensor for robotics
• Sensor for large format touch panels
• Object detection in vending machines, parking lots,
   ATM’s, and many others

Digital Ambient Light Sensor and Proximity Sensor with Interrupt Function

The ISL29011 is an integrated ambient and infrared Light-to-digital converter with a built-in IR LED driver and I2C Interface (SMBus Compatible). This device provides not only ambient Light sensing to allow robust backLight/display brightness control but also infrared sensing to allow Proximity estimation featured with interrupt function.

Features
Proximity Sensing
• Ambient IR cancellation during Proximity sensing
   - Works under direct sunLight
• IR LED driver with programmable source current
   - Adjustable current drive from 100mA to 12.5mA
• Programmable LED current modulation frequency
• Variable conversion resolution

Ambient Light Sensing
• Simple output code directly proportional to lux
• Adjustable sensitivity up to 65 counts per lux
• Selectable range (via I2C)
   - Range 1 = 0.015 lux to 1,000 lux
   - Range 2 = 0.06 lux to 4,000 lux
   - Range 3 = 0.24 lux to 16,000 lux
   - Range 4 = 0.96 lux to 64,000 lux
• Integrated 50Hz/60Hz noise rejection
• Works under various Light sources, including sunLight

Ideal Spectral Response for Light and Proximity Sensor
• Light Sensor close to human eye response
   - Excellent Light Sensor IR and UV rejection
• Proximity Sensor range from 850nm to 950nm
   - Can use either 850nm or 950nm LED solution

Ultra Low Power
• 90µA max operating current
• Software shutdown and automatic shutdown
   - 0.5µA max shutdown current

Easy to Use
• I2C (SMBus compatible) output
• No complex algorithms needed
• Temperature compensated
• Small form factor
   - 8 Ld 2.0mmx2.1mmx0.7mm ODFN package

Additional Features
• I2C and SMBus compatible
• 1.7V to 3.63V supply for I2C interface
• 2.25V to 3.63V Sensor power supply
• Pb-Free (RoHS compliant)

Applications
• Display and keypad dimming adjustment and Proximity
   sensing for:
   - Mobile devices: smart phone, PDA, GPS
   - Computing devices: Notebook PC, Webpad
   - Consumer devices: LCD-TV, digital picture frame, digital
      camera
• Industrial and medical Light and Proximity sensing

Digital Ambient Light Sensor and Proximity Sensor with Interrupt Function

The ISL29018 is an integrated ambient and infrared Light to digital converter with a built-in IR LED driver and I2C Interface (SMBus Compatible). This device provides not only ambient Light sensing to allow robust backLight/display brightness control but also infrared sensing to allow Proximity estimation featured with interrupt function.

Features
Proximity Sensing
• Ambient IR Cancellation During Proximity Sensing
    - Works Under Direct SunLight
• IR LED Driver with Programmable Source Current
    - Adjustable Current Drive from 100mA to 12.5mA
• Programmable LED current Modulation Frequency
• Variable Conversion Resolution

Ambient Light Sensing
• Simple Output Code Directly Proportional to lux
• Adjustable Sensitivity up to 65 Counts per lux
• Selectable Range (via I2C)
    - Range 1 = 0.015 lux to 1,000 lux
    - Range 2 = 0.06 lux to 4,000 lux
    - Range 3 = 0.24 lux to 16,000 lux
    - Range 4 = 0.96 lux to 64,000 lux
• Integrated 50/60Hz Noise Rejection
• Works Under Various Light Sources, Including SunLight

Ideal Spectral Response for Light and Proximity Sensor
• Light Sensor Close to Human Eye Response
    - Excellent Light Sensor IR and UV Rejection
• Proximity Sensor range from 850nm to 950nm
    - Can use either 850nm or 950nm LED solution

Ultra Low Power
• 90μA Max Operating Current
• Software Shutdown and Automatic Shutdown
    - 0.5μA Max Shutdown Current

Easy to Use
• I2C (SMBus Compatible) Output
• No Complex Algorithms Needed
• Temperature Compensated
• Small form Factor
    - 8 Ld 2.0mmx2.1mmx0.7mm ODFN Package

Additional Features
• I2C and SMBus Compatible
• 1.7V to 3.63V Supply for I2C Interface
• 2.25V to 3.63V Sensor Power Supply
• Pb-Free (RoHS compliant)

Applications
• Display and Keypad Dimming Adjustment and Proximity Sensing for:
    - Mobile Devices: Smart Phone, PDA, GPS
    - Computing Devices: Notebook PC, Webpad
    - Consumer Devices: LCD-TV, Digital Picture Frame, Digital Camera
• Industrial and Medical Light and Proximity Sensing