P/N + Description + Content Search

UPS Network Management Card 2 with Environmental Monitoring

UPS Network Management Card 2

Presentation
   UPS Management SmartSlot Card which supports the UPSLink protocol for SMT, SMX and SURTD Smart-UPS.

OEM Wireless Local Area Network PC Card

The Intersil OEM WLAN PC Card (Note 1) is a complete wireless high speed modem utilizing the Intersil PRISM™ Direct Sequence Spread Spectrum Wireless Transceiver chip set. This Card is made available to OEM’s (Original Equipment Manufacturers) intending to private label or integrate the product. It provides a sophisticated turnkey solution of hardware and software to system providers or integrators requiring wireless data communications capability and is ideal for integration into computer platforms.

Features
• FCC Certified Under Part 15 to Operate in 2.4GHz ISM Band
• Support for 1 and 2 Megabit Per Second (Mbps) Data Rates
• Supports the lEEE802.11 Direct Sequence Specification
• Microsoft® Windows® 95 NDlS3 and Microsoft Windows 3.1 NDIS2 Network Drivers Available (ODI Network Drivers Planned)
• Integrated Microstrip Antenna
• Microcode/BIOS are Contained in Programmable Nonvolatile Flash Memory
• Radio Range of 300 Feet in an Indoor Environment (Note 2)
• Completely Covered Assembly is Designed to Fully Support PCMCIA’s Defined Mechanical and Environmental Stress Conditions
• Intelligent Power Control, Including Low Power Standby Mode

Wireless Local Area Network PC Card

The Intersil WLAN PC Card (Note 1) is a complete wireless high speed modem utilizing the Intersil PRISM® Direct Sequence Spread Spectrum Wireless Transceiver chip set. It provides a sophisticated turnkey solution of hardware and software to system providers or integrators requiring wireless data communications capability and is ideal for integration into computer platforms.

Features
• FCC Certified Under Part 15 to Operate in 2.4GHz ISM Band
• Support for 1 and 2 Megabit Per Second (Mbps) Data Rates
• Supports the lEEE802.11 Direct Sequence Specification
• Microsoft® Windows® 95 NDlS3 and Microsoft Windows 3.1 NDIS2 Network Drivers Available (ODI Network Drivers Planned)
• Integrated Microstrip Antenna
• Microcode/BIOS are Contained in Programmable Nonvolatile Flash Memory
• Radio Range of 300 Feet in an Indoor Environment (Note 2)
• Completely Covered Assembly is Designed to Fully Support PCMCIA’s Defined Mechanical and Environmental Stress Conditions
• Intelligent Power Control, Including Low Power Standby Mode

Introduction
This document is intended to help hardware designers integrate the CobraNetTM interface into an audio system design. It covers the CS18100x, CS18101x, CS18102x, CS49610x, CS49611x, and CS49612x members of the CobraNetTM Silicon Series of devices, where “x” is the ROM version (ROM ID). This document also describes the CM-2 module with schematics, mechanical drawings, etc.

CobraNet is a combination of hardware (the CobraNet interface), Network protocol, and firmware. CobraNet operates on a switched Ethernet Network and provides the following additional communications services.
• Isochronous (Audio) Data Transport
• Sample Clock Distribution
• Control and Monitoring Data Transport

The CobraNet interface performs synchronous-to-isochronous and isochronous-tosynchronous conversions as well as the data formatting required for transporting real-time digital audio over the Network.
The CobraNet interface has provisions for carrying and utilizing control and Monitoring data such as Simple Network Management Protocol (SNMP) through the same Network connection as the audio. Standard data transport capabilities of Ethernet are shown here as unregulated traffic. Since CobraNet is Ethernet based, in most cases, data communications and CobraNet applications can coexist on the same physical Network.

WSN802G Introduction
The WSN802G transceiver module is a low cost, robust solution for 802.11b/g/n sensor Networks. The WSN802G is unique in that it is able to sleep while still remaining a member of an 802.11b/g/n Network. The WSN802G’s low active current and very low sleep current makes long life battery operation practical. The WSN802G module includes analog, digital and serial I/O, providing the flexibility and versatility needed to serve a wide range of sensor Network applications. The WSN802G module is easy to integrate and is compatible with standard 802.11b/g/n routers.

Features
WSN802G modules provide a unique set of features for wireless sensor Network applications:
• Compatibility with commercial and industrial 802.11b/g/n routers
• Low power consumption for long life battery operation including sleep mode
• Full -40 to +85 ºC industrial temperature range operation
• Analog and digital I/O, plus two serial and one SPI port
• Separate data and diagnostic ports
• System/application set up using just two Management Information Blocks (MIBs)
• Full 14 channel 802.11b/g coverage for world wide operation
• FCC, Canadian IC and European ETSI certifications
• Four module configurations:
   WSN802GC - solder reflow mounting with RF connector for external antenna connection
   WSN802GCA - solder reflow mounting with integral chip antenna
   WSN802GP - plug in connector mounting with RF connector for external antenna connection
   WSN802GPA - plug in connector mounting with integral chip antenna
• Automatic or manual I/O data reporting

Applications
WSN802G sensor Networks are well suited to applications where IEEE 802.11b/g/n router compatibility, industrial temperature range operation and long battery life are important. Many applications match these criteria, including:
• Energy Monitoring and Management
• Physical Asset Management
• Cold Chain Data Logging and Food Safety
• Security and Access Control Systems
• Environmental Monitoring
• Many More

Product Overview
Based on DUST Networks’ SmartMesh IA-510™ technology, RFM’s XDM2510H module provides WirelessHART® compatibility, excellent communications reliability and long battery life in a wide range of industrial automation applications. The XDM2510H employs dynamic Network optimization and intelligent routing to achieve carrier-class data reliability, low latency, and deterministic power Management.

Key Features
Wireless HART Compliance
• Interoperable with WirelessHART devices

Superior Reliability
• Robust Network reliability in even the most challenging industrial environments
• Frequency hopping provides interference rejection and minimizes multipath fading
• Automatic self-organizing mesh Networking provides built-in Network path redundancy
• Every XDM2510H acts as both an endpoint and a router, increasing Network reliability

Easy Integration
• XDM2510H provides all the module functionality with no embedded programming or complex configuration requirements
• XDM2510H interfaces are well-designed and multi-functional
• Industrial temperature range -40 to +85 °C
• XDM2510HP version for plug-in installation, XDM2510HC version for solder reflow

Ultra-low Power Consumption
• Industry leading 2.4 GHz radio technology is optimized for battery, energy scavenging or loop powered operation
• Ultra-efficient power usage, enabled through SmartMesh Intelligent Network Management, delivers over a decade of Network operation on two AA batteries
• Automatic Network-wide coordination for efficient power usage

Pre-certified Module
• IEEE 802.15.4 compliant module operates in the 2.4 GHz global license-free band
• XDM2510H is pre-certified for operation in the USA, Canada and Europe

Applications
• Industrial Automation
• Process Control and Data Acquisition
• Machine Health Monitoring
• Structural Integrity Monitoring
• Energy Management

Product Overview
Based on DUST Networks’ SmartMesh IA-510™ technology, RFM’s XDM2510H module provides WirelessHART® compatibility, excellent communications reliability and long battery life in a wide range of industrial automation applications. The XDM2510H employs dynamic Network optimization and intelligent routing to achieve carrier-class data reliability, low latency, and deterministic power Management.

Key Features
Wireless HART Compliance
• Interoperable with WirelessHART devices

Superior Reliability
• Robust Network reliability in even the most challenging industrial environments
• Frequency hopping provides interference rejection and minimizes multipath fading
• Automatic self-organizing mesh Networking provides built-in Network path redundancy
• Every XDM2510H acts as both an endpoint and a router, increasing Network reliability

Easy Integration
• XDM2510H provides all the module functionality with no embedded programming or complex configuration requirements
• XDM2510H interfaces are well-designed and multi-functional
• Industrial temperature range -40 to +85 °C
• XDM2510HP version for plug-in installation, XDM2510HC version for solder reflow

Ultra-low Power Consumption
• Industry leading 2.4 GHz radio technology is optimized for battery, energy scavenging or loop powered operation
• Ultra-efficient power usage, enabled through SmartMesh Intelligent Network Management, delivers over a decade of Network operation on two AA batteries
• Automatic Network-wide coordination for efficient power usage

Pre-certified Module
• IEEE 802.15.4 compliant module operates in the 2.4 GHz global license-free band
• XDM2510H is pre-certified for operation in the USA, Canada and Europe

Applications
• Industrial Automation
• Process Control and Data Acquisition
• Machine Health Monitoring
• Structural Integrity Monitoring
• Energy Management

OVERVIEW

The PC-Linq/Net USB Network Bridge provides a quick and easy solution to construct a Network via USB port

instead of any Network Interface Card. It is suitable for small offices, home offices, mobile users, and Network

gamers. with the PC-Linq/Net USB Network Bridge, users can share files, printers, peripheral equipment, and

more.

FEATURES

l  USB host to host communication

l  Standard Windows Explorer user interface

l  Maximum Data transfer rate: Over 5 Mbps.

l  Construct USB Network up to 17 PCs

l  Support TCP/IP, NetBEUI, IPX/SPX protocols

l  Full NDIS driver implementation

l  Single cable solution for Network communication

l  No external power needed

l  USB full speed connection

l  PnP for easy use

l  Support power Management

l  Suitable for SOHO and mobile  Network environment.

l  Compliant with USB specification version 1.1

l  Patent pending